The new Xtreme Shelter designed by Vallfirest combines a range of basic characteristics which make it different from the traditional Fire Shelter II. The new mix of materials provides an important improvement in isolation performance (see the graph), while the new ergonomic design based on fetal position allows to reduce significantly the weight and the volume, this way making it easier to transport and to unfold.
Features:
- The pump is metal, of double acting, hidroneta type, with gripping handles of plastic material.
- The tank is made of high strength plastic; its yellow color helps to identify it easily among the vegetation.
- Anti-kink hose to prevent clogging in use. At the end of the hose which is put inside the tank there is a counterweight which ensures full use of the reservoir content avoiding a possible obstruction.
Abrasion resistance:
The hose has a high resistance to abrasion. The special thickness of the hose lengthens the life of the hose in extreme abrasive conditions.
Cold resistance:
The hose withstands a low temperature down to -38 Cº without any damage to its components.
Ozone Resistance:
The hose shows no signs of cracks on the rubber tested at 100 pphm / 40oC / 72h.
Chemical resistance:
The hose is resistant to sea water as well as to contamination by most chemicals, hydrocarbons, oils, alkalines, etc.
Heat resistance:
The hose when subjected to a static pressure of 700 kpa will be able to withstand a temperature of 600oC for a minimum of 60 seconds without breaking or damaging the synthetic reinforcement.
Repair:
Damage to the tire, such as small holes or punctures, can be repaired with the use of the REPOKIT and the vulcanizing plate.
Measures wind speed: current, maximum and average, in a range of 0.4 to 40 meters per second, from 1 to 144 kilometers per hour, with a resolution of 0.1 and a reading of + -3%. Other units of measure: knots, mph, ft/min and Beaufort force.
It uses high precision jewel bearings and a light weight impeller to provide accurate air flow measurements even at low speeds. The impeller assembly can be replaced by the user if damaged. Liquid crystal display with large 9mm high digits for a clear readout.
Power is from an easily replaceable standard lithium coin cell battery, which will typically give up to 300 hours of operation. The instrument automatically switches off if no keys are pressed for 45 minutes.
Features:
- Includes protective cover, lanyard and battery
- Data hold function
- Large easy to read Display
- Waterproof and floats
- Replaceable impeller assembly
- Wide range of wind speeds and low starting speed
- Reliable, portable and easy to use
This model`s water drops are lightweight and their diameter is smaller in order to reach greater heat absorption.
When the water passes through the coupling and the stainless steel cylinder, it hits against the frontal cycloid-shaped shield, so that the small slot between the cylinder and the shield allows the stream to pour out, creating a protective shade of water.
The volume of water poured out and the formation of the shade of water depend directly on the water pressure. In this case, as we are working with a high-pressure and low-consumption nozzle, the optimal working pressure is between 20 and 22 bar with the consumption of 120 l/m.
Features:
- Cycloid-shaped shield: diameter of 25, maximum working pressure up to 35 bar.
- Coupling Barcelona according to UNE 23400.
- Y-shaped particle filter with stainless steel mesh.
- Semicircular yellow reflecting high visibility sticker.
Instructions for use:
- The nozzle should be connected to a hose and placed on flat ground
- It should work under the range of pressure as indicated above.
- The water is thrown out making up a half-moon-shaped shade of water.
Temperature and wind chill can be displayed in °C or °F.
Capable of measuring the slightest breeze, the unit uses an ultralight impeller mounted on jewel bearings to measure wind speed and provide an accuracy of ±3%. For temperature readings, the Kestrel uses a fast-responding, hermetically sealed thermistor accurate to ±1°F (±1°C). Wind chill factor is calculated automatically from wind and temperature data using the U.S. National Weather Services official tables.
Measuring modes and display units can be changed at any time. Results are displayed on a large, easy-to-read LCD which automatically shuts off 45 minutes after last key press. The Kestrel 2000 is housed in a reinforced fiberglass case which is waterproof and floats.
A convenient neck lanyard and one CR2032 battery are included. Two-year manufacturers warranty.
Features:
- Minimum wind speed: 0.7 mph (0.6 knots, 1 km / h, 0.3 m / s or 60 fpm).
- Maximum wind speed: 89 mph (78 knots, 144 km / h, 40 m / s, or 7.830 fpm).
- Wind speed accuracy: ± 3%.
- Update: 1 second.
- Temperature and wind chill accuracy: ± 1 ° C.
- Temperature Resolution: ± 0.1 ° C.
- Wind chill factor resolution: ± 0.1 ° F (± 0.1 ° C).
- Operating temperature: -4 ° F to +140 ° F (-20 ° C to +60 ° C).
- Temperature range: -20 ° F to +158 ° F (-29 ° C to +70 ° C).
- Temperature sensor: Precision thermistor hermetically sealed.
- Sealing: Electronics enclosure IP67 - water resistant to 3 ft. Floats.
- Battery: user-replaceable CR2032 coin cell battery with a typical life of 400 hours.
The Kestrel 3000 pocket time meter is the portable weather monitoring device that offers a wide range of functions in addition to accurate relative humidity measurements. The Kestrel 3000 Timer measures essential environmental parameters such as temperature and wind speeds, and has added benefits for professionals who need access to humidity and thermal stress readings.
Due to their compact size and high durability, the Kestrel 3000 and Kestrel 3500 have become the pocket time meters of choice for forest firefighters, concrete professionals, even professional trainers - all who need accurate weather information. to properly access environmental conditions and make crucial decisions.
The sensitive, user-replaceable impeller technology of the Kestrel 3000 provides accurate wind speed information. Additionally, an external temperature sensor and waterproof housing allow you to calibrate the temperature of water (even floats) and snow, as well as the open air. Includes a hard case, lanyard and battery.
Features:
- Current wind speed
- Maximum wind break
- Average wind speed
- Air, water and snow temperature
- Shaking chills
- RH
- Heat stress index
- Dew point
- Protective cover with safe overmolding
- Data hold function
- Large easy-to-read backlit display
- Waterproof and floats
- The humidity sensor can be recalibrated in the field with our relative humidity calibration kit.
- User replaceable impeller
- External temperature sensor
- Fast response patented RH sensor
- All instruments and accessories are fully assembled in the USA.
Abrasion resistance:
The hose has a high resistance to abrasion. The special thickness of the hose lengthens the life of the hose in extreme abrasive conditions.
Cold resistance:
The hose withstands a low temperature down to -38 Cº without any damage to its components.
Ozone Resistance:
The hose shows no signs of cracks on the rubber tested at 100 pphm / 40oC / 72h.
Chemical resistance:
The hose is resistant to sea water as well as to contamination by most chemicals, hydrocarbons, oils, alkalines, etc.
Heat resistance:
The hose when subjected to a static pressure of 700 kpa will be able to withstand a temperature of 600oC for a minimum of 60 seconds without breaking or damaging the synthetic reinforcement.
Repair:
Damage to the tire, such as small holes or punctures, can be repaired with the use of the REPOKIT and the vulcanizing plate.
Abrasion resistance:
The hose has a high resistance to abrasion. The special thickness of the hose lengthens the life of the hose in extreme abrasive conditions.
Cold resistance:
The hose withstands a low temperature down to -38 Cº without any damage to its components.
Ozone Resistance:
The hose shows no signs of cracks on the rubber tested at 100 pphm / 40oC / 72h.
Chemical resistance:
The hose is resistant to sea water as well as to contamination by most chemicals, hydrocarbons, oils, alkalines, etc.
Heat resistance:
The hose when subjected to a static pressure of 700 kpa will be able to withstand a temperature of 600oC for a minimum of 60 seconds without breaking or damaging the synthetic reinforcement.
Repair:
Damage to the tire, such as small holes or punctures, can be repaired with the use of the REPOKIT and the vulcanizing plate.
It provides comprehensive environmental data on nine different measurements with the simplicity of the Kestrel 1000. Simply turn it on and scroll left and right to see exactly what the environment is doing. When you're done, slip on the hard cover and your Kestrel 3500 Pocket Wind Meter is just about indestructible.
While the weather can dictate the comfort level of individuals working or playing outside, it plays an even bigger part in many professionals jobs. Irrigation professionals use the Kestrel 3500 to ensure they are irrigating efficiently and the water they are dispersing is actually hitting their intended target, and not evaporating or blowing away. And on construction sites Kestrel users are preventing plastic shrinkage cracks and curing concrete more effectively with their Kestrel 3500.
Features:
- Continuous stream;
- 8 liter-per-minute performance;
- Maximum 12m distance;
- Mist and stream options
Characteristics:
- It has 6 points of adjustment and regulation: neck perimeter, ear height, x2 height, chin.
- Sliding and removable chinstrap
- Material: Leather
Protection against water, fire and chafing
- Outer fireproof, impermeable Cordura boot with a reinforced toe and heel, coated in plastic to prevent chafing and damage caused by incandescent particles.
- 1100N flexible and light textile anti-perforation insole made with special fibers for excellent resistance covering 100% of the plantar surface with 0 mm of perforation.
Inner comfort
- Hypoallergenic highly-breathable foam textile inner lining with high resistance to abrasion and moisture absorption.
- Inner collar with an ergonomic design, padded with high-density polyurethane foam for better movement and foot adjustment.
- 100% ecological and recyclable anatomic insole. Removable, antibacterial, anti-static and anti-fungus.
With Vibram® nitrile rubber soles
- Light and flexible.
- Resistant to high temperatures (up to 300ºC).
- Excellent shock absorbance.
- Maximum grip on rocky and woody surfaces.
Quick and easy to put on
- The ‘Quick Lace’ system in the inner boot and YKK® zipper and Velcro® for outer closing enable quick, complication-free adjustments.
- Textile pull in the back for easier fitting and storage.
BP4 & BH4
Fuel discharge assembly for 1L Drip Torch.
The all-new 360 burner - patent pending -
A new design for better nozzle protection and a constant flame despite changes in wind direction for perfect operations at all times.
The most compact, resistant and light 1L torch
Made of high-density polyethylene (HDPE) it can withstand blows without getting dented. The threaded cover is made of 7075 aluminum with an anodized finish, which means it’s highly durable and ready for compact transportation and quick assembly for use.
Safer operation
A longer fuel tank and burner to increase the safety distance between firefighters and fire.
Built-in fuel level
The first torch with a fuel level indicator.
Fuel cap for 1L drip torch.
BH1, BP4 & BH4
BP4, BH4-18 & BH4-23
BH1 & BP4
Situations of use
- Entrapment situations during wildland fires.
- Presence of Carbon Monoxide.
- Presence of organic, inorganic gases and vapors, acids, amines, formaldehyde, mercury vapor, etc.
- Smoke, fog, harmful and toxic particles, viruses, bacteria, enzymes, hormones, proteins, nanomaterials, etc.
- Possible hypoxia, anoxia or burns in the respiratory apparatus. Oxygen deficiency < 17 %.
Features:
- Designed to be connected to an Xtreme Pack backpack, it allows access to the different pockets and is compatible with carrying a motor saw.
- Made of 1000D Cordura , it features anti-cut reinforcement for contact with a motor saw.
- Silver gray reflective strips.
- Shields or logos can be added.
BP4 & BH4
Features:
- Fully adjustable Fire Yoke telescopes to fit any torso length.
- Included Hotshot Lid provides 300 cu-in of storage, featuring low-profile admin pocket with pen slots.
- All body-facing components built with spacer mesh materials for moisture transfer and body heat dispersion.
- Wing pockets’ low-cut front enables firefighters to reach fuel and water bottles while wearing the pack. It holds up to three fuel bottles, three FSS canteen/water bottles, two 40oz Hydroflask, two 48oz Nalgene, and three 30oz Sigg bottles, or one 64oz Hydroflask growler per side.
- External detail pocket gives easy access to small items like headlamps, flagging, and batteries.
- Fire Belt system features 2” re-direct webbing and PALS web for MOLLE accessories.
- Draw-cord, top-load shroud access to main compartment allows maximum volume, extreme overloads, and internal organization.
- Internal stretch-woven hydration sleeve with porting (system not included).
- Zip-front, panel load access to main compartment.
Features:
- Zippered Fusee pockets (both sides) above four rows of PALS webbing for accessory connection.
- Two internal removable medical or accessory pockets.
- Loop system for attaching MR Stick It, and makes it Med Lid, Big 10 Lid, or Hot Lid compatible.
- Back, side zip access to floating, padded sleeve that fits laptops up to 15” and document/tablet sleeve pocket also doubles as a hydration sleeve.
Features:
- Double-layered in high-wear areas.
- 6,6 Nylon web for additional durability on corners and seams.
- Ambidextrous set-up for right or left hand access.
- MOLLE with tuck-tabs system for attachment.
- Four-flap closure seals completely and deploys rapidly and reliably.
- Replacement part for HOTSHOT and HOTSHOT TL.
- Built of custom spec’d 1000D CORDURA® with Teflon® and PU coatings for maximum durability, UV, and weather protection.