Self-protection nozzle vft

This model`s water drops are lightweight and their diameter is smaller in order to reach greater heat absorption.

When the water passes through the coupling and the stainless steel cylinder, it hits against the frontal cycloid-shaped shield, so that the small slot between the cylinder and the shield allows the stream to pour out, creating a protective shade of water.

The volume of water poured out and the formation of the shade of water depend directly on the water pressure. In this case, as we are working with a high-pressure and low-consumption nozzle, the optimal working pressure is between 20 and 22 bar with the consumption of 120 l/m.

Features:

• Cycloid-shaped shield: diameter of 25, maximum working pressure up to 35 bar.
• Coupling Barcelona according to UNE 23400.
• Y-shaped particle filter with stainless steel mesh.
• Semicircular yellow reflecting high visibility sticker.

Instructions for use:

• The nozzle should be connected to a hose and placed on flat ground
• It should work under the range of pressure as indicated above.
• The water is thrown out making up a half-moon-shaped shade of water.