The teeth have a great limited cutting capacity in stony areas. Heat tempered and replaceable teeth.

Features:

• Top of the American range.
• 129 cm handle.

Features:

• Wooden handle 1.3 meters.

Forged steel head. Heat treated working ends produce fine grain structure and RC 45 to 55 (Rockwell hardness value) for safety, edge holding and toughness. Red enamel coated body and clear lacquer cutting edges to discourage rust. Hickory handle. Dry section to moisture content below 10% to minimize shrinkage and help prevent loosening.

The head of the handle is inserted into the handle and fixed with a serrated aluminum wedge, made of resistant, lightweight material and does not expand or contract depending on humidity or temperature. The serrated shape of the wedge improves the bite. The head fixing hole is elongated and allows a strong mechanical connection.

Vallfirest company has developed a pack of fire blankets adaptable to all sorts of light vehicles and trucks used for fire extinction works. This kit aims to reach the thermal insulation inside the vehicle cabin while it remains trapped in a forest fire.

This system is much more effective if it is used together with external sprinkler kits in order to avoid glass breakage, as well as with the respiration units inside the vehicle.

The past accidents and the tests realized all over the world have shown us the way to follow in order to improve the self-protection equipment. It is known that the temperature inside the vehicle cabin is lower that outside, so that if insulating blankets are used, the thermal conditions are improved and it is possible for human beings to remain more time in safe conditions despite of the extreme conditions outside.

The insulating and fire blankets pack can be applied in any kind of vehicle used for fire extinction. It is easily mountable and replaceable from one vehicle to another if the substitution is needed. This kit is single-use in case of direct flame impact. It is designed and adapted according to different sizes of different vehicles.

Technical information:

• Composed of three layers.
• External layer: Aluminium.
• Intermediate layer: Basalt fibre.
• Internal layer: Poliacrilato fibre (TECSTAR).

Basalt:

• Working temperature up to 1100ºC (1200ºC at some peaks)
• Fireproof material according to DIN 4102 with normative against fire BS 476.
• Flashpoint :+ 1200ºC.
• Melting point: +1450-1650ºC.

Texture:

• Thermal shock >300ºC.
• Auto ignition 435ºC at 100% O
• Temperature of continuous work: 260ºC

Standards:

• ISO 9151:2016
• ISO 6942:2002
• ISO 11612:2015

The new Vallfirest extinguishing backpack represents a step forward towards professional and ergonomic equipment, which adds greater performance to workers and greater operability for crews that coexist with the use of backpacks with hand tools. Flexible cordura backpack with interchangeable canvas inner tank.

Double plunger manual pump. Ergonomic padded seat belts and harnesses. Pocket and belt with "Alice Clip" system for accessories. Top handles for loading assistance. Fastening strap for the chest. Pump and hand tool holding straps on the back.

Characteristics:

• Small size for transport in back pocket.
• Performance of 8 liters per minute.
• Cap with anti-deformation reinforcement and filter.
• Metallic outlet valve with 360º system.

External elements:

The helmet is made of a single piece of ABS / PC, has front light system anchor clips, flashlight anchor, folding grid screen system. Likewise, hearing protectors, neck protectors, radio and video systems can be incorporated.

Internal elements:

The inner harness is made of EPS, multi-size design XS to XL. The function is to distribute the absorbed impacts. It has a roulette adjustment system together with breathable padded fabrics that make up a completely ergonomic and comfortable harness.

Its main characteristic is its versatility in all types of terrain, thanks to the combination of the most used tools in forest fire extinction in a single multi-functional cutting blade, without the need to transport different tools.

The modifications have been made with the aim of improving the balance, functions and useful life of the materials used.

The Gorgui has an aluminum alloy central head on which the different functions are oriented, which become replaceable.

The new Mc Leod has been designed with a larger working surface and a greater height to have more pulling capacity. This improvement is essential in respect to Gorgui 1, as now there is no any interaction between the functions of the Mc Leod and the hoe, like in the previous model.

Mc Leod is much more clearly-defined as an individual tool in Gorgui

Pulaski hoe, designed for more organic soil, features a greater cutting surface, but the most important change here is the new balance. Due to the new aluminum head the weight is balanced much better, especially at the moment you have to apply a centered force when cutting or digging.

Pulaski part, designed for stony and rooty areas, features a new angle of attack.

Unlike the version 1, we now have an inclination angle of 6º and a new balance, which improve cutting and digging work.

Rake part has now got stronger cutting blades.

You can see the new design and all the clearly-defined functions presented together in one level.

The last new feature is the handle. We have taken the ergonomic design of the USFS McLeod varying the diameter of the handle according to the section

The design includes high-visibility reflective strips on both sides and an all-new fixing system so it can be put on without having to take the helmet off as it features a double Velcro® system for use and rest and can be comfortably worn hanging from the neck when not being used.

Made in a single piece(65% Lenzing® F.R., 30% Nomex®, 5% Kevlar®), it features a self-adherent central close system with six rear anchoring points for a perfect adjustment and nape and neck protection. The vft nape guard is compatible with any protective helmet.

Simple and compact, the TIKKA headlamp offers 100 lumens output and a wide beam for proximity lighting and short trips. Its phosphorescent reflector is handy to find in the dark.

Features:

• Two lighting modes:
• Mode that prioritizes autonomy.
• Mode that prioritizes the power of the lighting.
• Wide light beam.
• Phosphorescent reflector that allows you to find the flashlight in the dark.
• Compact and easy to use
• Push-button to quickly and easily select the lighting mode.
• Washable tape.

This model`s water drops are lightweight and their diameter is smaller in order to reach greater heat absorption.

When the water passes through the coupling and the stainless steel cylinder, it hits against the frontal cycloid-shaped shield, so that the small slot between the cylinder and the shield allows the stream to pour out, creating a protective shade of water.

The volume of water poured out and the formation of the shade of water depend directly on the water pressure. In this case, as we are working with a high-pressure and low-consumption nozzle, the optimal working pressure is between 20 and 22 bar with the consumption of 120 l/m.

Features:

• Cycloid-shaped shield: diameter of 25, maximum working pressure up to 35 bar.
• Coupling Barcelona according to UNE 23400.
• Y-shaped particle filter with stainless steel mesh.
• Semicircular yellow reflecting high visibility sticker.

Instructions for use:

• The nozzle should be connected to a hose and placed on flat ground
• It should work under the range of pressure as indicated above.
• The water is thrown out making up a half-moon-shaped shade of water.

Measures wind speed: current, maximum and average, in a range of 0.4 to 40 meters per second, from 1 to 144 kilometers per hour, with a resolution of 0.1 and a reading of + -3%. Other units of measure: knots, mph, ft/min and Beaufort force.

It uses high precision jewel bearings and a light weight impeller to provide accurate air flow measurements even at low speeds. The impeller assembly can be replaced by the user if damaged. Liquid crystal display with large 9mm high digits for a clear readout.

Power is from an easily replaceable standard lithium coin cell battery, which will typically give up to 300 hours of operation. The instrument automatically switches off if no keys are pressed for 45 minutes.

Features:

• Includes protective cover, lanyard and battery
• Data hold function
• Large easy to read Display
• Waterproof and floats
• Replaceable impeller assembly
• Wide range of wind speeds and low starting speed
• Reliable, portable and easy to use

Handle characteristics:

• Strong hardened aluminum tube.
• No rust.
• Smooth finish.
• Outside Diameter: 25mm.
• Inner diameter: 21mm.
• Exceptional resistance to breakage.
• Recovery at bending.

General characteristics:

• Tube: 1500 mm.
• Frame: Width 250 mm - Height: 500mm.
• Complete set: 1995 mm.
• Weight: 1.8 Kg.

Handle characteristics:

• Strong hardened aluminum tube.
• No rust.
• Smooth finish.
• Outside Diameter: 25mm.
• Inner diameter: 21mm.
• Exceptional resistance to breakage.
• Recovery at bending.

General characteristics:

• Tube: 1500 mm.
• Frame: Width 250 mm - Height: 500mm.
• Complete set: 1995 mm.
• Weight: 1.8 Kg.

High resistance to abrasion, cuts and tears
Made with 1000 Cordura and breathable mesh.

Belt-integrated hydration system
Includes the Hydrapack® system with a tube and nozzle tip on the outside and 2.8 liter capacity with an upper opening for easy fill and cleaning. FDA-approved tank, PVC and BPA-free.

Customization
Possibility of adding a shield or logo.

Features:

• European ATEX Regulation: II 1 GD Ex ia IIC T4 Ga / Ex ia IIIC T 85ªC Da LOM 12ATEX2004
• Weight: 145gr (batteries included)
• Measurements: 15 x 3.8 x 4.4 cm
• High intensity white LED 135 Lumens
• Photoluminescent ring for high visibility
• Maximum resistance resin body
• Autonomy: 4h (maximum intensity), 30h (low intensity)
• Power supply: 4 R03 AAA alkaline batteries

The new Xtreme Shelter designed by Vallfirest combines a range of basic  characteristics which make it different from the traditional Fire Shelter II. The new mix of  materials provides an important improvement in isolation performance (see the graph),  while the new ergonomic design based on fetal position allows to reduce significantly  the weight and the volume, this way making it easier to transport and to unfold.

The kit includes:

• Custom molded cup holder with built-in level for maximum compass accuracy
• Precision pivot with standard 1/4 - 20 tripod
• Lightweight thin-wall anodized aluminum shaft and molded paddle
• Padded nylon zippered carry bag with belt that holds the mount and Kestrel Meter

Specs:

• Fits any Kestrel 5000 meter series
• Vane Mount Kit Weight: 5.1oz / 144g
• Vane Mount & Kestrel Weight: 8.7 oz / 246g
• Box dimensions: 7.5 "x2.75" x2.5 "(19cm x 7cm x 6.5cm)
• 2 years warranty
• Country of origin: USA
• Hunters and Military Professionals: The combination of wind speed and surveillance direction is an invaluable tool for shooters of all stripes. The Kestrel Portable Wind Vane Mount is Kestrel's latest accessory for everyone who needs accurate wind speed and directional data - from snipers to artillery specialists, even weekend sports shooters.

Abrasion resistance:
The hose has a high resistance to abrasion. The special thickness of the hose lengthens the life of the hose in extreme abrasive conditions.

Cold resistance:
The hose withstands a low temperature down to -38 Cº without any damage to its components.

Ozone Resistance:
The hose shows no signs of cracks on the rubber tested at 100 pphm / 40oC / 72h.

Chemical resistance:
The hose is resistant to sea water as well as to contamination by most chemicals, hydrocarbons, oils, alkalines, etc.

Heat resistance:
The hose when subjected to a static pressure of 700 kpa will be able to withstand a temperature of 600oC for a minimum of 60 seconds without breaking or damaging the synthetic reinforcement.

Repair:
Damage to the tire, such as small holes or punctures, can be repaired with the use of the REPOKIT and the vulcanizing plate.

Temperature and wind chill can be displayed in °C or °F.

Capable of measuring the slightest breeze, the unit uses an ultralight impeller mounted on jewel bearings to measure wind speed and provide an accuracy of ±3%. For temperature readings, the Kestrel uses a fast-responding, hermetically sealed thermistor accurate to ±1°F (±1°C). Wind chill factor is calculated automatically from wind and temperature data using the U.S. National Weather Service’s official tables.

Measuring modes and display units can be changed at any time. Results are displayed on a large, easy-to-read LCD which automatically shuts off 45 minutes after last key press. The Kestrel 2000 is housed in a reinforced fiberglass case which is waterproof and floats.

A convenient neck lanyard and one CR2032 battery are included. Two-year manufacturer’s warranty.

Features:

• Minimum wind speed: 0.7 mph (0.6 knots, 1 km / h, 0.3 m / s or 60 fpm).
• Maximum wind speed: 89 mph (78 knots, 144 km / h, 40 m / s, or 7.830 fpm).
• Wind speed accuracy: ± 3%.
• Update: 1 second.
• Temperature and wind chill accuracy: ± 1 ° C.
• Temperature Resolution: ± 0.1 ° C.
• Wind chill factor resolution: ± 0.1 ° F (± 0.1 ° C).
• Operating temperature: -4 ° F to +140 ° F (-20 ° C to +60 ° C).
• Temperature range: -20 ° F to +158 ° F (-29 ° C to +70 ° C).
• Temperature sensor: Precision thermistor hermetically sealed.
• Sealing: Electronics enclosure IP67 - water resistant to 3 ft. Floats.
• Battery: user-replaceable CR2032 coin cell battery with a typical life of 400 hours.

The Kestrel 3000 pocket time meter is the portable weather monitoring device that offers a wide range of functions in addition to accurate relative humidity measurements. The Kestrel 3000 Timer measures essential environmental parameters such as temperature and wind speeds, and has added benefits for professionals who need access to humidity and thermal stress readings.

Due to their compact size and high durability, the Kestrel 3000 and Kestrel 3500 have become the pocket time meters of choice for forest firefighters, concrete professionals, even professional trainers - all who need accurate weather information. to properly access environmental conditions and make crucial decisions.

The sensitive, user-replaceable impeller technology of the Kestrel 3000 provides accurate wind speed information. Additionally, an external temperature sensor and waterproof housing allow you to calibrate the temperature of water (even floats) and snow, as well as the open air. Includes a hard case, lanyard and battery.

Features:

• Current wind speed
• Maximum wind break
• Average wind speed
• Air, water and snow temperature
• Shaking chills
• RH
• Heat stress index
• Dew point
• Protective cover with safe overmolding
• Data hold function
• Large easy-to-read backlit display
• Waterproof and floats
• The humidity sensor can be recalibrated in the field with our relative humidity calibration kit.
• User replaceable impeller
• External temperature sensor
• Fast response patented RH sensor
• All instruments and accessories are fully assembled in the USA.

It provides comprehensive environmental data on nine different measurements with the simplicity of the Kestrel 1000. Simply turn it on and scroll left and right to see exactly what the environment is doing. When you're done, slip on the hard cover and your Kestrel 3500 Pocket Wind Meter is just about indestructible.

While the weather can dictate the comfort level of individuals working or playing outside, it plays an even bigger part in many professionals’ jobs. Irrigation professionals use the Kestrel 3500 to ensure they are irrigating efficiently and the water they are dispersing is actually hitting their intended target, and not evaporating or blowing away. And on construction sites Kestrel users are preventing plastic shrinkage cracks and curing concrete more effectively with their Kestrel 3500.

Abrasion resistance:
The hose has a high resistance to abrasion. The special thickness of the hose lengthens the life of the hose in extreme abrasive conditions.

Cold resistance:
The hose withstands a low temperature down to -38 Cº without any damage to its components.

Ozone Resistance:
The hose shows no signs of cracks on the rubber tested at 100 pphm / 40oC / 72h.

Chemical resistance:
The hose is resistant to sea water as well as to contamination by most chemicals, hydrocarbons, oils, alkalines, etc.

Heat resistance:
The hose when subjected to a static pressure of 700 kpa will be able to withstand a temperature of 600oC for a minimum of 60 seconds without breaking or damaging the synthetic reinforcement.

Repair:
Damage to the tire, such as small holes or punctures, can be repaired with the use of the REPOKIT and the vulcanizing plate.

Abrasion resistance:
The hose has a high resistance to abrasion. The special thickness of the hose lengthens the life of the hose in extreme abrasive conditions.

Cold resistance:
The hose withstands a low temperature down to -38 Cº without any damage to its components.

Ozone Resistance:
The hose shows no signs of cracks on the rubber tested at 100 pphm / 40oC / 72h.

Chemical resistance:
The hose is resistant to sea water as well as to contamination by most chemicals, hydrocarbons, oils, alkalines, etc.

Heat resistance:
The hose when subjected to a static pressure of 700 kpa will be able to withstand a temperature of 600oC for a minimum of 60 seconds without breaking or damaging the synthetic reinforcement.

Repair:
Damage to the tire, such as small holes or punctures, can be repaired with the use of the REPOKIT and the vulcanizing plate.

These added features make the 5500 the Kestrel Meter of choice for military professionals, HAZMAT teams, and flight crews. Like all the new 5000 series, it can store up to approximately 10,000 data points.

Please note that you will need a dongle. A workaround if you don't have this with you would be to upload your data to your mobile smartphone and email it to yourself and open it on your Mac / PC. On the 4000 series you didn't need the Dongle.

All 5000 series meters will have both a bright green backlight, which is ideal for even high sunlight conditions, and a night vision that preserves the backlight. Red Night Vision (NV) backlight incorporates optical filter to reduce overall glare and minimize blue and green spectrum light to preserve night vision. (Note: This 'night vision' is not compatible with night vision equipment). Basically, with the red backlight, the eyes don't need to adjust when looking from the meter to the horizon during night use.

Features:

• Header (true and magnetic)
• Direction of the wind
• Crosswind
• Head wind / tail wind
• Altitude
• Tendency to pressure
• Barometric pressure
• Wet bulb temperature
• Relative humidity in%
• Heat stress index
• Dew point
• Density altitude
• Shaking chills
• Air, water and snow temperature ° F or ° C
• Current, average and maximum air speed
• Waterproof (sealed to IP67 standards) and floats
• Time and date
• Easy to read backlit display
• Data Logger (automatic and manual)
• Customizable data storage: 2,900 data points
• Minimum, Maximum and Average Values
• 3-line multifunction display
• The humidity sensor can be recalibrated in the field with our relative humidity calibration kit.
• Outdoor temperature, humidity and pressure sensors for fast and accurate readings
• Customize screens to display user-selected measurements
• Souvenir chart and trends
• User replaceable impeller
• Flip-top impeller cap allows use of other functions while protecting impeller
• Data mapping
• Upload to a computer (with optional interface) Mac or PC
• Five languages (English, French, Spanish, German and Italian)
• Rugged (drop tested to MIL-STD-810G), waterproof (sealed to IP67) and floats.
• US Patent Nos. 5,783,753 and 5,939,645 and 6,257,074
• Assembled in the USA

With a replacement impeller on hand, you can be sure your Kestrel is always ready to provide fully accurate wind or air flow measurements. Each impeller is individually calibrated in our NIST traceable wind tunnel to Kestrel specifications and comes with its own Certificate of Conformity. Simply replacing the impeller in any Kestrel meter of any age restores factory calibration. And the best thing Replacing your impeller is hassle-free and tool-free just press the new impeller into place, popping out the old one at the same time. That's a Kestrel patented feature. Field impeller replacement is a breeze, so maintaining Kestrel accuracy is too.

Compatible with: Kestrel 1000-3500, Kestrel 4000 Series, Kestrel 5 Series

Characteristics:

• An adjustable pocket that adapts to all radio brands and models
• Black
• Material: 1000D Cordura®
• One size fits all

Features:

• Adjustable straps to secure various tanks.
• Padding to protect the back.
• Padded shoulder straps with an adjustable load system.
• Padded adjustable belt.
• Compatible with a rigid tank up to 20 L.

Features:

• Effective on class A wildland  fires from 0.1%
• Effective on hydrocarbon fires from 0.3%
• Ecological (fluorine-free)
• Fully biodegradable
• Compatible with all dosage systems
• Usable with fresh or sea water
• Applied in very low concentration: Wetting 0.1 - 0.5% / Foaming 0.5 - 1%.
• Presentation: 25L container
• European Standards: EN 1568 1-2-3.
• International Standards: UL Listed, NFPA 18.

Features:

• Universal adapter to mount a wide variety of accessories available on the market.
• Compatible with vft2 helmet.
• Quickly attach/detach mounted accessories from the rail system.
• Lightweight and durable structure.
• Includes clip for 15 mm strap.
• Material: Nylon.
• Side support dimensions: 140 x 70 mm.
• Frontal support dimensions: 92,5 x 60 mm.
• Total weight: 49,5 g.
• Available in black.

Features:

• Universal adapter to mount a wide variety of accessories available on the market.
• Compatible with vft1 helmets.
• Quickly attach/detach mounted accessories from the rail system.
• Lightweight and durable structure.
• Includes clip for 15 mm strap.
• Material: Nylon PA66.
• Side support dimensions: 160 x 95 mm.
• Frontal support dimensions: 92,5 x 60 mm.
• Total weight: 67 g
• Available in black.